- the so called sunpassing in the case of a malfunctioning of the satellite attitude control system represents a high thermal load for optical components
- optical components, which are located in the focus of the optical path, are subject to a thermal loa d of several MW/m2
- withing the EnMAP project, a test setup for the sunpassing test of the slit component of an optical sensor under vacuum conditions was developed and realised, which was then integrated in the solar oven and the Xenon high power radiator of the DLR Institute for Solar Research
- the slit component was tested with a representative solar spectrum under vacuum conditions
-
Design and Manufacturing of a Mock-Up of the ITER Vacuum Vessel Support and Performance of a Vertical Load Test -
Biomass Coupon Thermal Cycling Test -
Determination of Material Properties of Additive Layer Manufacturing Aluminium and Titanium Alloy Specimens at Low Temperatures -
Vibration test for an Endoscope for the Fusion Experiment Joint European Torus (JET) -
Development of a CFRP Floor Panel for a Cargo Aircraft -
Stability Test of Aicraft Floor-Panels -
FEM analyses of the waveguides for MetOp-SG (Meteorological Operational Satellite - Second Generation)
KRP Mechatec GmbH is an engineering services provider specialized in structural tests and analyses in the field of space, aviation, experimental research and other high-tech industries, certified according to DIN EN ISO 9001:2015.
KRP Mechatec GmbH Boltzmannstr. 2 85748 Garching | ||
Telefon Telefax E-Mail Internet | +49 (0)151 1461 2442 +49 (0)8131 505 331 info@krp-m.de | |
Copyright © 2023 KRP Mechatec GmbH